Rotary Tablet Press Machine

1. Do molds need to be purchased separately? What size/shape are they?
Yes, you do get a mold for the machine. Each machine is equipped with molds. It can be customized with your logo or lettering if you wish, but it will take 6-8 weeks.

2. What technical support and training come with this machine?
There are a number of ways we are able to support you:

Every machine comes with a full manual that is emailed to you after purchase.
There is a large range of video tutorials to teach you how to use the machine.
The machine comes with lifetime technical support. You can call, Skype, or email to get answers to your questions and problems.

3. How do I clean this machine ? What maintenance is required?
This machine is cleaned in the same way as any press. By 6 steps below:

Removal of Powder – Start at the highest point of the machine while it is still assembled. Hoover out the residue powders using a paintbrush to dislodge any powders trapped in tight areas.

Remove the hopper, boot, base plate, and tooling.

Apply Soap – Wash the entire machine with warm soapy water. Making sure to pay extra attention to all of the contact parts. Do not soak the machine, rather apply it with a cloth or sponge and then wipe it dry as you go.

Sanitise – use a sanitizing spray or wipe to clean down the entire machine making sure you pay close attention to all contact parts.

Rinse – Next rinse off any soap or sanitizing spray with potable water. Making sure not to soak the machine, rather apply it with a cloth or sponge and then wipe it dry as you go.

Oil and Lubricate – Finally to prevent rust and keep the machine running smoothly lubricate.

We would recommend that you store the machine under a dust cover and in a cool, low-humidity environment to prevent rust.